Справочник Пользователя для Kathrein UFS 924sw/500GB/CI+ 20210209

14

(standard  TV),  the original format is to be 

transmitted to the TV set, select the “On” setting. 

If  the setting is “Of f”,  the programme may be 

automatically scaled up to the HDTV format 720p 

by the receiver.

Select here whether HDCP (digital copy protection) 

is to be constantly set to “On” with free channels or 

is not to be activated, “Off”.

If  you select “Of f”,  the TV  set must be switched 

on  or of f  separately.  If you select “On”, the  TV 

set  will be switched on automatically as the 

receiver  starts up (but only if the  TV  set was in 

stand-by mode). If the receiver is switched off into 

standby mode, the TV set will also be switched to 

standby mode.
Automatically switching the TV set on/off by the 
receiver is available only if the TV set supports 
this function!

Here  you can select the type of screen display 

mode for 4:3 broadcasts on a 16:9 TV set. Either

-  Normal (Pillarbox)
-  Stretched (full screen) or
-  Zoom in (Pan & Scan)

Here you can select the type of audio signal that 

is  transmitted by the HDMI interface. Select the 

signal that your TV set can process:

-  PCM (Stereo) or
-  S/PDIF format (multichannel)

Here you can select whether the receiver should 

automatically select the Dolby Digital soundtrack 

(if this is transmitted).

Select  the type of video signal at the 

TV  Scart 

socket here. Select the signal that your TV set can 

process.

-  CVBS  – composite video (Composite V ideo, 

Blanking, and Sync) signal or

-  RGB – red/green/blue signal or
-  Y/C – S-Video signal (luminance/chrominance)

Select the type of video signal at the VCR Scart 

socket  here. Select the signal that your external 

recorder can process.

-  CVBS  – composite video (Composite V ideo, 

Blanking, and Sync) signal or

-  Y/C – S-Video signal (luminance/chrominance)