Техническая Спецификация для Graupner Hendheld RC 2.4 GHz No. of channels: 12 33124
Модели
33124
32
Transmitter description - Telemetry data display
As described on page 220 in the context of sub-menu
"SENSOR SELECT" for the "Telemetry" menu …
"SENSOR SELECT" for the "Telemetry" menu …
Model select
Base setup model
Model type
Model type
Copy / Erase
Suppress models
Suppress:
TOG
… the output of sensors attached to the receiver can be
processed and activated for graphic presentation on the
screen. This data is then appropriately displayed by the
graphic indicators described below.
These graphic elements can be reached from the
transmitter's base screen by briefl y touching the
processed and activated for graphic presentation on the
screen. This data is then appropriately displayed by the
graphic indicators described below.
These graphic elements can be reached from the
transmitter's base screen by briefl y touching the
or
keys of the left or right touch pad. Page back and forth
between individual graphic elements with the same keys
and return to the base screen again with the
between individual graphic elements with the same keys
and return to the base screen again with the
ESC
key.
Notice:
The sequence of the following element descriptions
corresponds to their selection sequence when touching
the
The sequence of the following element descriptions
corresponds to their selection sequence when touching
the
key.
More details about the following named modules can be
found in the appendix and in Internet at www.graupner.
de in the web page for the given product.
found in the appendix and in Internet at www.graupner.
de in the web page for the given product.
RECEIVER
RX–S QUA: 100%
RX–S STR: 100%
RX–S STR: 100%
TX–dBm: 33dBm
RX–dBm: 33dBm
RX–VOLT:4.8 TMP
L–PACK: 10ms
CH OUTPUT TYPE:ONCE
R–LOW V:4.6 +22°C
This screen presents the "RX DATAVIEW" of the
Telemetry menu's "SETTING & DATA VIEW", see page
209, with data processed and displayed graphically.
The displayed items are as follows:
Telemetry menu's "SETTING & DATA VIEW", see page
209, with data processed and displayed graphically.
The displayed items are as follows:
Value
Explanation
RX-S QUA
signal quality in %
RX-S ST
signal strength in %
RX-dBm
reception power in dBm
TX-dBm
transmit power in dBm
V PACK
Indicates the longest time span in ms
in which data packages are lost in the
transmission from the transmitter to the
receiver.
in which data packages are lost in the
transmission from the transmitter to the
receiver.
RX-VOLT
current operating voltage of the
receiver's power supply in volts
receiver's power supply in volts
M-RX V
lowest receiver operating voltage since
last startup, in volts
last startup, in volts
TMP
the thermometer depicts the receiver's
current operating temperature
current operating temperature
AKKU 1
(GENERAL + ELECTRIC modules)
0.0V
0.0A
0mAh
This display depicts current voltage, current current
draw and, if attached, the expended capacity of "Batt 1"
connected to the General-Engine (Order No. 33610),
General-Air (Order No. 33611) or Electric-Air module
(Order No. 33620).
draw and, if attached, the expended capacity of "Batt 1"
connected to the General-Engine (Order No. 33610),
General-Air (Order No. 33611) or Electric-Air module
(Order No. 33620).
SENSOR 1
(GENERAL + ELECTRIC module)
0.0V
0°C
SENSOR 1
If attached, this display depicts currenly measured voltage
and temperature from a "T(EMP)1" temperature/voltage
sensor, Order No. 33612 or 33613 for General-Engine
(Order No. 33610), General-Air (Order No. 33611) or
Electric-Air module (Order No. 33620).
and temperature from a "T(EMP)1" temperature/voltage
sensor, Order No. 33612 or 33613 for General-Engine
(Order No. 33610), General-Air (Order No. 33611) or
Electric-Air module (Order No. 33620).
Telemetry data display