Техническая Спецификация для Behringer XENYX 1002 MIX BOARD XENYX 1002

Модели

XENYX 1002

XENYX

502/802/1002/1202

1. INTRODUCTION

Congratulations! In purchasing our XENYX 502/802/1002/1202

you have acquired a mixing console whose small size belies its

incredible versatility and audio performance.

The XENYX Series represents a milestone in the development

of mixing console technology. With the new Xenyx microphone

preamps including phantom power as an option, balanced line

inputs and a powerful effects section, the mixing consoles in the

XENYX Series are optimally equipped for live and studio

applications. Owing to state-of-the-art circuitry your XENYX

console produces a warm analog sound that is unrivalled. With

the addition of the latest digital technology these best-in-class

consoles combine the advantages of both analog and digital

technology.

The microphone channels feature high-end XENYX Mic

Preamps that compare well with costly outboard preamps in

terms of sound quality and dynamics and boast the following

features:
s· 130 dB dynamic range for an incredible amount of headroom
s

A bandwidth ranging from below 10 Hz to over 200 kHz for

crystal-clear reproduction of even the finest nuances

s· The extremely low-noise and distortion-free circuitry

guarantees absolutely natural and transparent signal

reproduction

They are perfectly matched to every conceivable

microphone with up to 60 dB gain and +48 volt phantom

power supply

They enable you to use the greatly extended dynamic range

of your 24-bit/192-kHz HD recorder to the full, thereby

maintaining optimal audio quality

British EQ

The equalizers used for the XENYX Series are based on the

legendary circuitry of top-notch consoles made in Britain, which

are renowned throughout the world for their incredibly warm

and musical sound character. Even with extreme gain settings

these equalizers ensure outstanding audio properties.

CAUTION!

We should like to draw your attention to the fact

that extreme volumes may damage your hearing

and/or your headphones or loudspeakers. Turn the

MAIN MIX control and PHONES control in the main

section fully counter-clockwise before you switch

on the unit. Always be careful to set appropriate

volume levels.

1.1 General mixing console functions

A mixing console fulfils three main functions:

Signal processing: Preamplification, level adjustment,

mixing of effects, frequency equalization.

Signal distribution: Summing of signals to the aux sends

for effects processing and monitor mix, distribution to one

or several recording tracks, power amp(s), control room

and 2-track outputs.

Mix: Setting the volume level, frequency distribution and

positioning of the individual signals in the stereo field, level

control of the total mix to match the recording devices/

crossover/power amplifier(s). All other mixer functions can

be included in this main function.

The interface of BEHRINGER mixing consoles is optimized for

these tasks enabling you to easily keep track of the signal path.

FOREWORD

Dear Customer,
Im sure youre one of

those people who have

devoted themselves

body and soul to your

chosen area and no

doubt this has made you

an expert in your field.

Well, for over 30

years, my passion has

been

music

and

electronics. This not only

led me to establish

BEHRINGER, but also

enabled me to share my

enthusiasm with our

employees. During all the

years Ive been involved

with studio technology

and end users, I have

developed a feel for the things that really count, such as sound

quality, reliability and ease of use. What is more, I have always

had the desire to test the boundaries of what is technically

feasible.

It was precisely this motivation that prompted me to start work

on a new series of mixing consoles. Since our EURORACKs had

already set new standards world-wide, I knew the development

objectives behind the next generation of mixing consoles had to

be especially ambitious.

Thus, the concept and design of the new XENYX mixing

consoles bear my signature. The design work, the entire circuit

diagram and PCB development, and even the mechanical concepts

are my own work. I carefully selected each individual component

with the aim of pushing the mixing consoles combining analog

and digital technologies to their limits.

My vision was to enable you, the user, to give free rein to your

true potential and creativity. The result is mixing consoles that

combine incredible performance with intuitive operability. They

cannot fail to impress with their extremely flexible routing

possibilities plus a fantastic wealth of functions. Innovative

technologies, such as the completely new XENYX Mic Preamps

and the British EQs, guarantee optimum sound quality. And

extraordinarily high-quality components provide unrivalled

reliability, even under extreme loads.

Thanks to the quality and ease of use of your new XENYX

mixing console youll soon come to appreciate that I, both

personally and in my capacity as musician and sound engineer,

put you, the end user, first and that these products were only

possible because of the passion and the attention to detail that

went into them.

Thank you for the confidence you have placed in us by

purchasing the XENYX mixing console. I should also like to thank

all those who, with their personal commitment and passion, have

helped me create this impressive series of mixing consoles.

Kindest regards,

Uli Behringer

1. INTRODUCTION