Справочник Пользователя для Jeti RC console 2.4 GHz No. of channels: 16 80001571
Модели
80001571
computer radio control system
EN
5.
In the „Function Assignment“ menu
use the „F3(Add)“ button to create all of
your desired functions. Then you can assign
transmitter control switches/sticks to the
functions by editing each function’s
„Control“ item, see chapter: „Select
your desired functions. Then you can assign
transmitter control switches/sticks to the
functions by editing each function’s
„Control“ item, see chapter: „Select
6.
The „Servo assignment“ menu displays
the receiver channels and their transmitter
output assignments. The channels are
assigned in the order that you created the
functions in the previous menu. If you want
to change any of the output assignments,
select the channel you want to edit and
reassign its output. Otherways press
„F5(Next)“ to confirm
output assignments. The channels are
assigned in the order that you created the
functions in the previous menu. If you want
to change any of the output assignments,
select the channel you want to edit and
reassign its output. Otherways press
„F5(Next)“ to confirm
7.
The screen will display a question which
asks if you really want to create and activate
the new model. Press the „F5(Yes)“ button
to confirm.
the new model. Press the „F5(Yes)“ button
to confirm.
8.
The „Servo Setup“ menu is where you
can set all of your servo neutral positions,
servo output throw limits, servo reversing,
delay etc. You should return to this menu
after you have bound your receiver and
transmitter. See the chapter 8.4: Receiver-
>Binding.
servo output throw limits, servo reversing,
delay etc. You should return to this menu
after you have bound your receiver and
transmitter. See the chapter 8.4: Receiver-
>Binding.
a).
Use the „F2(Add)“ button to create a
new mixer. Select „Engine“ in the „From“
item. Then select „Sound M“ (the name of
the sound function) in the „To“ item. The
item „Master Value“ represents the
amount of mixing from the input function
to the output function for this mixer. With
the „F5(Next)“ button you will create the
mixer and the display will change to show
the overview of your programmed free
mixers.
item. Then select „Sound M“ (the name of
the sound function) in the „To“ item. The
item „Master Value“ represents the
amount of mixing from the input function
to the output function for this mixer. With
the „F5(Next)“ button you will create the
mixer and the display will change to show
the overview of your programmed free
mixers.
Once your transmitter has been bound with a receiver and has been
connected to its power supply, the last step consists of tuning the
servo output functions, see chapter 7.3.4: Setup of receiver
outputs.
To complete this model we just need to configure a free mixer from
the throttle function to the motor sound module. In this example we
will set a switch to enable/disable the mixer so that when the switch
is „on“ the motor sound module is controlled with the throttle
(motor speed). Go to the „Fine tuning -> Free mixers“ menu.
connected to its power supply, the last step consists of tuning the
servo output functions, see chapter 7.3.4: Setup of receiver
outputs.
To complete this model we just need to configure a free mixer from
the throttle function to the motor sound module. In this example we
will set a switch to enable/disable the mixer so that when the switch
is „on“ the motor sound module is controlled with the throttle
(motor speed). Go to the „Fine tuning -> Free mixers“ menu.
3.
3.
control input“. The only exception is the motor sound module
function, which you cannot simply assign to a control switch/stick,
because it wil be controlled by a mixer. The mixer will allow the
motor sound will be played proportionally to the motor speed. For
the siren function you may take advantage of the switch „Sa“
(spring-loaded switch). After you create of all of your desired
functions press the „F5(Next)“ button to confirm.
function, which you cannot simply assign to a control switch/stick,
because it wil be controlled by a mixer. The mixer will allow the
motor sound will be played proportionally to the motor speed. For
the siren function you may take advantage of the switch „Sa“
(spring-loaded switch). After you create of all of your desired
functions press the „F5(Next)“ button to confirm.
30