Справочник Пользователя для Jeti RC console 2.4 GHz No. of channels: 16 80001571
Модели
80001571
computer radio control system
EN
9.5. System
- Use this menu to configure the system functions of your
transmitter. All of the settings in this menu are global and do not
change when you switch between models.
transmitter. All of the settings in this menu are global and do not
change when you switch between models.
9.5.1 Configuration
Basic transmitter settings
Language Setting
1.
Use this menu to select the transmitter’s language setting.
All of the transmitter’s text and sounds will changed based upon
your selection.
All of the transmitter’s text and sounds will changed based upon
your selection.
4.
4.
After changing the transmitter’s language you need to
turn the transmitter off and back on for the change to
take effect.
turn the transmitter off and back on for the change to
take effect.
Warning:
2.
User Name
Enter the user name that you want to appear in the User block on the
desktop.
desktop.
3.
Stick Mode
The transmitter supports Modes 1-4. To change the stick mode you
can either use the „3D button“ to highlight and select the line item
or simply press the „F3“ button. Either will take you into the Stick
Mode menu. Use the „F1-F4“ buttons to make your selection and
then press the „F5(Ok)“ button to confirm. The mode change will
only be effective for new models. All of your stored models will retain
their existing stick modes.
can either use the „3D button“ to highlight and select the line item
or simply press the „F3“ button. Either will take you into the Stick
Mode menu. Use the „F1-F4“ buttons to make your selection and
then press the „F5(Ok)“ button to confirm. The mode change will
only be effective for new models. All of your stored models will retain
their existing stick modes.
4.
Sound Profile
This item allows you to select the sound profile for your transmitter.
This determines how your transmitter will audibly communicate
with you. You can select between; quiet (mute), beep only, beep and
voice (sound file) or voice (sound file) only.
This determines how your transmitter will audibly communicate
with you. You can select between; quiet (mute), beep only, beep and
voice (sound file) or voice (sound file) only.
5.
Date and Time
Here is where you set the current date and time. The DC/DS-16 will
automatically observe the time change for Daylight Saving Time.
The time and date information is used when creating new models
and for telemetry.
automatically observe the time change for Daylight Saving Time.
The time and date information is used when creating new models
and for telemetry.
1
2
3
4
5
6
8
9
10
7
78