Техническая Спецификация для Buffalo LinkStation 441D 12TB LS441D1204-EU
Модели
LS441D1204-EU
47
5
Install a new Buffalo OP-HD/LS series drive in the cartridge.
6
Replace the four screws.
7
Insert the new drive in the empty slot.
8
Close the front panel.
9
Connect all cables, then turn on the LinkStation.
10
For RAID 0
After 5 minutes, the power LED will light up white. Navigate to Drives - RAID in Advanced Settings. Select the
array with the error, then click Delete RAID Array.
Navigate to Drives - Drives. Choose the new drive (the unformatted one) and format the drive. After formatting
After 5 minutes, the power LED will light up white. Navigate to Drives - RAID in Advanced Settings. Select the
array with the error, then click Delete RAID Array.
Navigate to Drives - Drives. Choose the new drive (the unformatted one) and format the drive. After formatting