Техническая Спецификация для Kathrein 20210166
9
The information in this operating manual was correct at the time of going to print. We reserve the right
however to make changes at any time and without prior notice. If new software is released for your
receiver, and this affects the information in the operating manual (e.g. changes to the menus and/
or functions), if we believe it necessary we will make available new operating manuals for download at
“www.kathrein.de”.
however to make changes at any time and without prior notice. If new software is released for your
receiver, and this affects the information in the operating manual (e.g. changes to the menus and/
or functions), if we believe it necessary we will make available new operating manuals for download at
“www.kathrein.de”.
Make a note of the receiver's basic settings (these are set during fi rst installation), so you can restore
them if necessary!
them if necessary!
Please be aware of your responsibility towards your fellow human beings! Keep this manual
for any questions that arise later, and if the receiver passes to another owner, pass it on to the
new owner.
for any questions that arise later, and if the receiver passes to another owner, pass it on to the
new owner.
Please see the UFS 925 Operating manual – Part 1, “Connection and set-up” for details on how to
connect the receiver and carry out fi rst installation.
connect the receiver and carry out fi rst installation.
In the explanations of the UFS 925 menus and functions that follow, it is assumed that the receiver has
been correctly connected and installed (as described in the Operating manual – Part 1, “Connection
and set-up”).
been correctly connected and installed (as described in the Operating manual – Part 1, “Connection
and set-up”).
Miscellaneous
Safety instructions - Important notes
Network function
To connect the receiver to the network via the PC/laptop, you must have unrestricted rights
(administrator rights) for your PC/laptop and on your network. For this refer to the section “Mainmenu”,
“Interfaces”, “Ethernet Settings”.
(administrator rights) for your PC/laptop and on your network. For this refer to the section “Mainmenu”,
“Interfaces”, “Ethernet Settings”.
Power consumption in standby mode < 0.5 W
The standby power consumption of < 0.5 W given on the receiver packaging will only be achieved when
the receiver is in standby mode with the display switched off. You can defi ne this setting in the following
menu: “Mainmenu”, “Settings”, “User-Defi ned Settings”, “Customize Screen Menu”, “Front display
in standby” → Setting “Off”.
the receiver is in standby mode with the display switched off. You can defi ne this setting in the following
menu: “Mainmenu”, “Settings”, “User-Defi ned Settings”, “Customize Screen Menu”, “Front display
in standby” → Setting “Off”.
Note on the specifi cation of the hard disk size in this manual
The UFS 925 is available with two different sizes of hard disk (500 GB and 1 TB). The operating manual
is the same for all versions and is based on the 1 TB version. Discrepancies may occur between data/
on-screen displays and this manual with respect to the storage capacity of your device’s hard disk
(depending on which version you are using).
is the same for all versions and is based on the 1 TB version. Discrepancies may occur between data/
on-screen displays and this manual with respect to the storage capacity of your device’s hard disk
(depending on which version you are using).