Техническая Спецификация для Sony BDV-E4100
58
GB
BDV-E6100/BDV-E4100/BDV-E3100/BDV-E2100
4-446-734-13(1)
D:\NORM'S JOB\SONY HA\SO130005\BDV-E6100_4100_3100_E2100
(PMRF 02)\4446734131_GB (CEK)\100ADD.fm
(PMRF 02)\4446734131_GB (CEK)\100ADD.fm
masterpage: Left
The system does not output sound of
TV programs correctly when
connected to a set-top box.
TV programs correctly when
connected to a set-top box.
t Set [Audio Return Channel] in [HDMI
Settings] of [System Settings] to [Off]
(page 50).
(page 50).
t Check the connections (page 20).
Severe hum or noise is heard.
t Move your audio equipment away
from the TV.
t Clean the disc.
The sound loses stereo effect when
you play a CD.
you play a CD.
t Select stereo sound by pressing
The sound outputs from the center
speaker only.
speaker only.
t Depending on the disc, the sound may
output from the center speaker only.
No sound or only a very low-level
sound is heard from the surround
speakers.
sound is heard from the surround
speakers.
t Check the speaker connections and
settings (pages 18, 41).
t Check the sound mode setting
t Depending on the source, the effect of
the surround speakers may be less
noticeable.
noticeable.
t A 2-channel source is being played.
Distortion occurs in the sound of a
connected equipment.
connected equipment.
t Reduce the input level for the
connected equipment by setting
[Attenuate - AUDIO] (page 48).
[Attenuate - AUDIO] (page 48).
A sudden loud music is heard.
t The build-in sound demonstration is
activated. Press
2
– to reduce the
volume or press x to stop the
demonstration.
demonstration.
Radio stations cannot be tuned in.
t Check that the antenna (aerial) is
connected securely. Adjust the antenna
(aerial).
(aerial).
t The signal strength of the stations is
too weak (when tuning in with
automatic tuning). Use manual tuning.
automatic tuning). Use manual tuning.
The disc does not play.
t The region code on the BD/DVD does
not match the system.
t Moisture has condensed inside the unit
and may cause damage to the lenses.
Remove the disc and leave the unit
turned on for about half an hour.
Remove the disc and leave the unit
turned on for about half an hour.
t The system cannot play a recorded disc
that is not correctly finalized
(page 61).
(page 61).
File names are not displayed
correctly.
correctly.
t The system can only display ISO
8859-1 compliant character formats.
Other character formats may be
displayed differently.
Other character formats may be
displayed differently.
t Depending on the writing software
used, the input characters may be
displayed differently.
displayed differently.
A disc does not start playing from the
beginning.
beginning.
t Resume play has been selected. Press
OPTIONS and select [Play from start],
then press
then press
.
Tuner
Playback