Справочник Пользователя для Ositech comm 614006-001

3 - 18

Trumpcard Ethernet LAN

Section Three

The DOS ODI driver OTCETH.COM for the Trumpcard PC Card is an
executable DOS TSR (Terminate and Stay Resident) program.

It must be loaded 

always after the LSL (Link Support Layer) module and

before the IPXODI (IPX Stack Protocol).

An example of a possible AUTOEXEC.BAT file allowing the loading of
necessary modules to establish a link from a DOS Workstation to a
Netware Server is:

LSL

OTCETH
IPXODI

NETX or VLM

Note:

If your Ethernet frame type is NOT 802.2, you must use the NET.CFG

file to supply the appropriate frame type.  The OTCETH driver will
default to 802.2 in accordance with Novell's specifications.

Note:

Keyword specifications associated with the ODI drivers are explained

in Appendix A, Error Messages in Appendix C.

Novell Netware for OS/2

When installing Netware for OS/2, you may use the automatic installation
for the Ositech Trumpcard ODI device driver.

1. Follow the instructions in the Netware Requester for OS/2

manual on how to Install and Configure the Novell Netware
OS/2 Requester.

2. During installation of the requester, when prompted for the

Network Interface Card Driver, enter 

OTCETH.SYS

.

3. The installation utility will confirm if this is a third party NIC

driver, enter 

YES

4. When prompted to enter the file to install, enter

A:\NETWARE\OS2\OTCETH.SYS

Insert the Trumpcard driver diskette into Drive A.

5. Continue with the Netware requester installation, the final step

will be to configure the NET.CFG file. See Appendix A for ODI
keywords.

End of Installation.