Справочник Пользователя для Rangemaster U110120 - 01A

Скачать
Страница из 20
1
1.  Before You Start
Thank you for buying a Rangemaster appliance. We hope 
that it provides a stylish yet practical solution to your cooling 
needs. We hope that this handbook supplies you with all the 
information you require. If there is anything you are not sure 
of please contact us (see Warranty section for the Customer 
Service details).
WarnInG: this appliance must be earthed.
Please leave the appliance to stand for at least eight 
hours. this will allow the cooling system to settle 
following transportation.
always make sure a qualified person installs this 
appliance.
the freezer compartment is rated at 4 stars.
this appliance is designed for domestic use only. 
Using it for any other purpose could invalidate any 
warranty or liability claim.
Before you plug the appliance into the mains, clean 
the inside of the appliance using warm water and 
bicarbonate of soda, then dry thoroughly.
Check that no parts of the appliance are damaged, 
especially parts of the cooling system, pipes or leads. If 
damage has occurred DO NOT install the appliance. You 
should contact a qualified service engineer or return the 
appliance to its place of purchase.
If the accessories inside the appliance have been 
disturbed during transit, reposition them in accordance 
with the instructions.
Make sure that the electrical supply to your plug socket 
is correct for this appliance: the required information is 
on the data badge of the appliance.
Once the appliance is installed, cleaned and dry, it is 
ready to be plugged in and switched on.
Never allow the back coils of the appliance to come into 
contact with the wall surface.
Never block the ventilation openings of the appliance. 
It is vital to keep your appliance well ventilated, so that 
there is proper airflow between the bottom of the unit 
and the plinth/kickplate which it is sitting on.
Safety
the data badge is located inside the appliance (left-
front edge of the freezer compartment).
WarnInG: keep this appliance clear of any 
obstruction.
Do not damage the refrigerant circuit. If it does 
become damaged, do not use the appliance. In case 
of damage, contact customer service, ventilate 
the room where the appliance is located and avoid 
flames.
WarnInG: Do not use mechanical devices (such as 
hair dryers) to defrost this appliance.
When replacing old appliances, make sure that you 
have disabled any locking mechanisms before disposal: 
it may even be best to remove the appliance door 
completely to prevent children from becoming trapped 
inside the appliance.
The appliance must be connected to the power supply 
safely. Loose connections, broken plugs and bare 
wires are a safety hazard. Make sure that all electrical 
connections are sound.
Before undertaking any routine maintenance or minor 
repairs, disconnect the appliance from the electrical 
supply: this includes cleaning.
DO NOT touch cold surfaces of the appliance while it is 
in use as this will cause hands to stick to them leading 
to freezer burns.
When moving the appliance take care not to damage 
the leads, pipes or condenser unit. Should these parts 
become damaged, contact a qualified service engineer.
Effervescent liquids (fizzy drinks) should never be 
frozen. These liquids expand during freezing and 
this may lead to the bottles/containers shattering or 
exploding.
Foods that are intended to be defrosted or cooked first, 
such as breads or meats, must not be eaten in their 
frozen state.
Never use sharp, metal implements to scrape ice off the 
surface of this appliance. Only use implements, which 
are fit for this purpose (such as plastic scrapers) and use 
carefully to avoid damaging the lining of the appliance.
The cooling system contains refrigerant and oils, all of 
which are harmful to health if leaked. Should leakage 
occur, disconnect the appliance and ventilate the room 
it is installed in. Take care to make sure that you do not 
get any coolant near to, or in, your eyes. 
Contact a service engineer or arrange to have the 
appliance removed. 
DO NOT use the appliance under any circumstances.
Electrical safety
Connections to the mains supply should be in 
accordance with local regulations.
The appliance must be plugged into an earthed socket.
The plug MUST be accessible after the appliance has 
been positioned.
The appliance is supplied with a standard three-pin 
plug, of which the one for grounding should never be 
removed.
Hold the plug, not the electrical cable, when 
unplugging the appliance.
Make sure that the appliance does not trap the electric 
cable.
Do not step on the cable.
Avoid damage to the electric cable when moving the 
appliance.