Справочник Пользователя для SAM4S ER-380
56
• Operating Instructions
ER-380 / ER-380M
Table Management and Clerk Interrupt Operations
Overview
The ER-380 / ER-380M can employ a manual previous balance, hard check, or soft check
system. (You must select hard or soft check posting in memory allocation programming -
the default selection is soft.)
system. (You must select hard or soft check posting in memory allocation programming -
the default selection is soft.)
There are two methods in ER-380 / ER-380M to manage check track. One is table
management system and the other is clerk interrupt system. If you want to use clerk interrupt
system.
management system and the other is clerk interrupt system. If you want to use clerk interrupt
system.
First, Program as below.
To Enter Clerk Interrupt System (To Exit Table Management system)
1.Program Clerk Secret Code
2.Set system option #2 to a value of 1. See "System Option Programming"
3.Set system option #26 to a value of 1. See "System Option Programming“.
To Exit Clerk Interrupt System (To Enter Table Management system)
♦ Set system option #26 to a value of 0. See "System Option Programming“.