Справочник Пользователя для Arkon CDA-118M
24
-EN
AUDIO is selected on the setup menu in step 2.
AUX Zone Select (AUX ZONE SELECT)
When AUX ZONE is ON, you can select the connected speaker to
output the sound signal of AUX Zone.
output the sound signal of AUX Zone.
Setting the MUTE Level (MUTE LEVEL)
Set the amount of attenuation when muting is on.
Operating the External Audio Processor (USER PRESET)
Turn the Rotary encoder to select the desired preset number, and then
press
press
/ENTER.
• For the operation of external audio processor, refer to the Owner’s
Manual of the external audio processor you purchased.
Turning Media Xpander ON/OFF
When the Media Xpander is ON, and external audio processor is
connected, you can adjust the Media Xpander level.
connected, you can adjust the Media Xpander level.
Setting the MX Level
MX (Media Xpander) makes vocals or instruments sound distinct
regardless of the music source. The FM radio, CD, USB memory and
iPhone/iPod, will be able to reproduce the music clearly. The initial
setting is different depending on the source.
regardless of the music source. The FM radio, CD, USB memory and
iPhone/iPod, will be able to reproduce the music clearly. The initial
setting is different depending on the source.
Subwoofer On and Off
The adjustment can also be made by pressing and holding AUDIO* for
at least 2 seconds. Refer to “Turning Subwoofer ON/OFF” (page 21) .
at least 2 seconds. Refer to “Turning Subwoofer ON/OFF” (page 21) .
* For this unit, when connecting IMPRINT audio processor, you can’t
turn the subwoofer ON or OFF by pressing AUDIO.
GENERAL is selected on the setup main menu in step 2.
Setting TUNER mode (TUNER)
You can change the tuner frequency area.
Playing MP3/WMA/AAC Data (PLAY MODE)
This unit can play back CDs containing both CD and MP3 /WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first. (If you use an MP3 changer, you have to
change discs.)
change discs.)
Sound (Beep) Guide Function
This function will give audible feedback with varying tones depending
upon the button pressed.
upon the button pressed.
Turning Mute Mode On/Off (INT MUTE)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
automatically muted whenever the interrupt signal is received from the
device.
• When BLUETOOTH is set to ADPT, INT MUTE cannot be set. Refer
• When the BLUETOOTH INTERFACE (KCE-400BT) is connected,
set INT MUTE to OFF.
Setting the AUX+ Mode
You can input the audio of an external device, (such as a Portable audio
player) to the BLUETOOTH interface connector of this unit. A special
Conversion cable (KCE-237B) is necessary to adapt the BLUETOOTH
interface connector as an AUX IN.
player) to the BLUETOOTH interface connector of this unit. A special
Conversion cable (KCE-237B) is necessary to adapt the BLUETOOTH
interface connector as an AUX IN.
An external device and a BLUETOOTH INTERFACE (KCE-400BT)
cannot be connected at the same time.
cannot be connected at the same time.
Setting the AUX+ NAME Mode
You can change the AUX+ NAME when AUX+ is ON.
Setting the AUX ZONE Mode
You can input the audio of an external device, (such as a Portable music
player) to the AUX Input Terminal connector of this unit. And an
optional adapter cable is required (standard RCA to 3.5 ø mini-phono
plug or 3.5 ø to 3.5 ø mini phono plug).
player) to the AUX Input Terminal connector of this unit. And an
optional adapter cable is required (standard RCA to 3.5 ø mini-phono
plug or 3.5 ø to 3.5 ø mini phono plug).
Audio Setting
ALL (Initial setting) / ZONE1 / ZONE2
ALL :
The sound is output from all Speakers.
ZONE1 :
The sound can only be output from the Boat Speakers.
ZONE2 :
The sound can only be output from the ZONE2
Speakers.
Speakers.
LV 1 / LV 2 (Initial setting) / LV 3 / LV 4 / LV 5 / LV 6
LV 1 :
The sound is attenuated by 10 dB.
LV 2 :
The sound is attenuated by 20 dB.
LV 3 :
The sound is attenuated by 30 dB.
LV 4 :
The sound is attenuated by 40 dB.
LV 5 :
The sound is attenuated by 50 dB.
LV 6 :
The sound is attenuated by 60 dB.
PRE-1 (Initial setting) / PRE-2 / PRE-3 / PRE-4 / PRE-5 / PRE-6
OFF (Initial setting) / ON
NON EFFECT / LEVEL 1 / LEVEL 2 / LEVEL 3
SUBW ON (Initial setting) / SUBW OFF
General Setting
MODE1 (Initial setting) / MODE2
MODE1 :
FM: 87.7~107.9 MHZ; AM: 530~1710 KHZ
MODE2 :
FM: 87.50~108.00 MHZ; AM: 531~1602 KHZ
CD-DA / CD-DA&MP3 (Initial setting)
CD-DA:
Only the CD data in Session 1 can be played
back.
back.
CD-DA&MP3: CD data, MP3/WMA/AAC files in mixed mode, and
multi-session discs can be played back.
BEEP ON (Initial setting) / BEEP OFF
INT MUTE ON / INT MUTE OFF (Initial setting)
AUX+ ON / AUX+ OFF (Initial setting)
AUX+ ON :
Set to ON when an external device is connected. If
TUNER/SOURCE is pressed and AUX+ is
selected, the sound of the external device is input
to the unit.
TUNER/SOURCE is pressed and AUX+ is
selected, the sound of the external device is input
to the unit.
AUX+ OFF : When set to OFF, AUX+ source cannot be selected.
AUX (Initial setting) / TV / DVD / PORTABLE / GAME
OFF (Initial setting) / ON
AUX ZONE ON: Set to ON when an external device is
connected. If TUNER/SOURCE is pressed and
AUX ZONE is selected, the sound of the
external device is input to the unit.
AUX ZONE is selected, the sound of the
external device is input to the unit.
AUX ZONE OFF: When set to OFF, AUX ZONE source cannot be
selected.