Справочник Пользователя для Elitegroup 945GCT-M3

47

Using BIOS

This option opens a dialog box that lets you install fail-safe defaults for all appropriate
items in the Setup Utility: Press <Y> and the <Enter> to install the defaults.
Press <N> and then <Enter> to not install the defaults. The fail-safe defaults
place no great demands on the system and are generally stable. If your system is
not functioning correctly, try installing the fail-safe defaults as a first step in
getting your system working properly again. If you only want to install fail-safe
defaults for a specific option, select and display that option, and then press <F6>.

This option opens a dialog box that lets you install optimized defaults for all
appropriate items in the Setup Utility. Press <Y> and then <Enter> to install the
defaults. Press <N> and then <Enter> to not install the defaults. The optimized
defaults place demands on the system that may be greater than the performance
level of  the components, such as the CPU and the memory. You can cause fatal
errors or instability if you install the optimized defaults when your hardware does
not support them. If you only want to install setup defaults for a specific option,
select and display that option, and then press <F7>.

When this item is enabled, BIOS will disable the clock signal of free DIMM and PCI
slots.

If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.

This item allows you to adjust the CPU clock to 100 MHz. You can key-in the
numbers within the range to make a precise and ideal adjustment.

Enables you to set the CPU clock. The CPU clock ratio times the CPU Host/PCI
Clock should equal the core speed of the installed processor.