Справочник Пользователя для IBM Broadcom 10Gb 2-port Ethernet Expansion Card (CFFh) 44W4466

Broadcom 10Gb 2-Port and 4-Port Ethernet Expansion Cards (CFFh) for IBM BladeCenter

5

Figure 3. IBM BladeCenter H I/O topology showing the I/O paths from CFFh expansion cards

One I/O module must be installed in the chassis for each Ethernet port that you wish to use on the 

expansion card. The specific I/O bays in the chassis are listed in Table 4.

For the Broadcom 10Gb 2-port Ethernet Expansion Card (CFFh), you must install an I/O module in 

z

I/O bays 7 and 9 (that is, two I/O modules).

For the Broadcom 10Gb 4-port Ethernet Expansion Card (CFFh), you must install an I/O module in 

z

I/O bays 7, 8, 9, and 10 (that is, four I/O modules).

Table 4. Locations of I/O modules required to connect to the expansion card

Expansion card

I/O bay 7

I/O bay 8

I/O bay 9

I/O bay 10

Broadcom 10Gb 2-port Ethernet 

Expansion Card (CFFh)

Supported I/O 

module

Not used

Supported I/O 

module

Not used

Broadcom 10Gb 4-port Ethernet 

Expansion Card (CFFh)

Supported I/O 

module

Supported I/O 

module

Supported I/O 

module

Supported I/O 

module