Инструкции Пользователя для BMW 2016 M6 Coupe
Avoiding unintentional alarms
The tilt alarm sensor and interior motion sen‐
sor can be switched off together, such as in
the following situations:
sor can be switched off together, such as in
the following situations:
▷
In automatic car washes.
▷
In duplex garages.
▷
During transport on trains carrying vehi‐
cles, at sea or on a trailer.
cles, at sea or on a trailer.
▷
With animals in the vehicle.
Switching off the tilt alarm sensor and
interior motion sensor
Press the remote control button again
within 10 seconds as soon as the vehicle
within 10 seconds as soon as the vehicle
is locked.
The indicator lamp lights up for approx. 2 sec‐
onds and then continues to flash.
The tilt alarm sensor and interior motion sen‐
sor are turned off, until the vehicle is locked
again.
The indicator lamp lights up for approx. 2 sec‐
onds and then continues to flash.
The tilt alarm sensor and interior motion sen‐
sor are turned off, until the vehicle is locked
again.
Switching off the alarm
▷
Unlock vehicle with the remote control or
switch on the ignition, if needed through
emergency detection of remote control, re‐
fer to page
switch on the ignition, if needed through
emergency detection of remote control, re‐
fer to page
.
▷
With Comfort Access: if you are carrying
the remote control on your person, grasp
the driver side or front passenger side door
handle completely.
the remote control on your person, grasp
the driver side or front passenger side door
handle completely.
Power windows
Hint
Take the remote control with you
Take the remote control with you when
Take the remote control with you when
leaving the vehicle so that children, e.g., can‐
not operate the power windows and injure
themselves.◀
not operate the power windows and injure
themselves.◀
Opening
▷
Press the button to the resistance
point.
The window opens while the switch is held.
The window opens while the switch is held.
▷
Press the switch beyond the resist‐
ance point.
The window opens automatically. Pressing
the switch again stopse the motion.
The window opens automatically. Pressing
the switch again stopse the motion.
See also: Convenient opening, refer to
page
page
Closing
Keep the closing path clear
Monitor closing and make sure that the
Monitor closing and make sure that the
closing path of the window is clear; otherwise,
injuries may result.◀
injuries may result.◀
▷
Pull the switch to the resistance
point.
The window closes while the switch is
held.
The window closes while the switch is
held.
▷
Pull the switch beyond the resistance
point.
The window closes automatically. Pulling
again stops the motion.
The window closes automatically. Pulling
again stops the motion.
See also: closing by means of Comfort Access,
refer to page
refer to page
.
Seite 45
Opening and closing
Controls
45
Online Edition for Part no. 01 40 2 959 695 - II/15