Справочник Пользователя для HP CD-9400

7

3.

Hold the CD vertically and insert it into the CD slot,
label side to the left.

.

4.

To load more CDs, repeatedly press

2

 DISC NUMBER

3 (or 2

 DISC 

3  on the remote) so the desired rack

number appears on the display. Then repeat Step 3.

5.

When you finish loading the desired CDs, press 

CLOSE 

to close the rack cover.

To remove a CD, select the slot number of the disc you want
to remove, then press 

UNLOAD. 

The rack rotates the

selected disc slot to the front. When the rack cover opens,
remove the selected CD. Press 

OPEN/CLOSE 

to close the rack

cover.

Cautions:
•

Do not try to manually open the rack cover; only use

OPEN/CLOSE.

•

Do not load anything other than 5-inch or 3-inch CDs
into the slots. This could damage the CD changer.

•

Do not use an adapter for 3-inch CDs. Also, avoid
placing 3-inch  CDs between 5-inch CDs as this makes
it hard to remove the 3-inch CDs.

•

The CD changer does not play with the rack cover open.

Notes:
•

You can use 

OPEN/CLOSE 

to open the rack cover and

remove the disc if the disc to remove is already at the
front of the rack. The display shows 

 while the

rack cover is open.

•

You can open the rack cover even while a disc is
playing. Hold down 

OPEN/CLOSE 

until the display

shows 

. The rack cover opens and the display

shows 

. In this case, the rack does not rotate

and  you cannot use 

UNLOAD, SINGLE PLAY/ACCESS,

or 

2

 DISC NUMBER 

3.

Many of the CD changer’s buttons also have a
corresponding button on the remote control, and you can
use either the CD changer or the remote control to control
the function.

To use the remote control, point it at the infrared sensor
on the front panel and press the control button.

When the remote control’s operating distance reduces or if
the remote control stops working, replace the batteries.

Note: The remote operates the CD changer from up to 23
feet away and within 30º of the front of the CD changer.

The multi-disc rack holds 100 CDs. The disc slots are
 numbered in clockwise order, from 1 to 100, and can hold
either 3-inch or 5-inch CDs.
Follow these steps to load up to 100 CDs in the slots.

1.

Press 

to turn on the CD changer. If necessary,

repeatedly press 

2

 DISC NUMBER 

3 (or 2

 DISC 

3

on the remote) so the slot number you want appears
on the display.

6

7

¡ ¢

4 1

6

7

¡ ¢

4 1

2.

Press 

UNLOAD 

to open the rack cover.

Warning: To protect your hearing, set the volume on your
receiver or amplifier to its lowest level before you load and
play a CD.

Caution: Do not set the volume on your receiver or
amplifier too high while playing soft or quiet portions of a
music program. Due to the CD changer’s wide dynamic
range, the speakers might be damaged if the music program
includes a sudden loud passage.

Note: Always handle CDs by their edges. Fingerprints and
scratches on a CD’s surface can prevent the laser beam from
correctly reading the digital information. For more
information, see “CD Care Tips” on Page 15.