Инструкции Пользователя для Biostar M7VIG 400
M7VIG 400 BIOS Setup
31
9 Frequency/ Voltage Control
Figure 9. Frequency/ Voltage Control
CPU Clock
This
item allows you to select CPU Clock, and CPU over clocking.
The Choices: 100MHz (Default)
Min = 100 Max = 132
Key in a Dec Number.
Min = 100 Max = 132
Key in a Dec Number.
If unfortunately, the system’s frequency that you are selected is
not functioning, there are two methods of booting-up the system.
not functioning, there are two methods of booting-up the system.
Method 1: Clear the COMS data by setting the JCOMS1 ((2-3) closed))
as “ON” status. All the CMOS data will be loaded as
defaults setting.
defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously,
after that keep-on pressing the <Insert> key until the
power-on screen showed. This action will boot-up the
system according to FSB of the processor.
power-on screen showed. This action will boot-up the
system according to FSB of the processor.
※
It’s strongly recommended to set CPU Vcore and clock in
default setting. If the CPU Vcore and clock are not in default
setting, it may cause CPU or M/B damage.
setting, it may cause CPU or M/B damage.