Справочник Пользователя для Bil-Jax Personal Lift Cougar Lift Electric Hydraulic Lift Platform

Ensure the following general safety precautions are observed when maintenance is per-
formed on the Cougar Lift. 

•  ALWAYS perform maintenance procedures according to manufacturer's re-

quirements. NEVER short change maintenance procedures. 

•  ALWAYS check hydraulic system. Make sure all lines, connectors, and fittings 

are tight and in good condition. 

•  ALWAYS keep all mechanisms properly adjusted and lubricated according to 

maintenance schedule and manufacturers specifications. 

•  ALWAYS perform a function check of operating controls before each use and 

after repairs have been made. 

•  ALWAYS locate and protect against possible pinch points prior to performing 

maintenance and repairs. 

•  ALWAYS use only factory approved parts to repair or maintain this equipment. 

If this equipment is rebuilt, retesting is required in accordance with factory in-
structions. 

•  NEVER add unauthorized fluids to the hydraulic system or battery. Check 

manufacturers specifications. 

•  NEVER exceed the manufacturer's recommended relief valve settings. 
•  NEVER attempt repairs you do not understand. Consult manufacturer if you 

have any questions regarding proper maintenance, specifications, or repair. 

 

At Bil-Jax, we are dedicated to the safety of all users of our products. Therefore, all 
Bil-Jax lifts are designed, manufactured and tested to comply with current applicable 
Federal OSHA and ANSI codes and regulations. 

There may be occasions when a Bil-Jax lift is involved in an incident that results in struc-
tural damage to the lift. This can seriously compromise the ability of the lift to perform in 
a safe manner. Therefore, whenever a Bil-Jax lift is damaged structurally or when there is 
the possibility of structural damage (this damage may be internal and is not always visi-
ble to the naked eye), Bil-Jax requires that the lift be returned to our facility at 125 Tay-
lor Parkway, Archbold, Ohio, for reconditioning. If you have any questions concerning 
what constitutes structural damage, please call the Bil-Jax Service Department at 
800-537-0540. 

There may be occasions when a Bil-Jax lift is involved in an incident resulting in non-
structural damage. When this occurs and repairs are made by the owner or area distribu-
tor, please notify Bil-Jax of these non-maintenance repairs and request a repair form to 
be filled out and returned to Bil-Jax.