Инструкции Пользователя для Biostar G41D-M7

1. 

There is no power in the system. 

Power LED does not shine; the 
fan of the power supply does not 
work  

2. 

Indicator light on keyboard does 

not shine. 

1. 

Make sure power cable is 

securely plugged in. 

2. Replace 

cable. 

3. 

Contact technical support. 

System is inoperative. Keyboard lights 
are on, power indicator lights are lit, 
and hard drives are running. 

Using even pressure on both ends of 
the DIMM, press down firmly until the 
module snaps into place. 

System does not boot from a hard disk 
drive, but can be booted from optical 

drive. 

1. 

Check cable running from disk to 
disk controller board. Make sure 

both ends are securely plugged 
in; check the drive type in the 
standard CMOS setup. 

2. 

Backing up the hard drive is 

extremely important. All hard 
disks are capable of breaking 
down at any time. 

System only boots from an optical 
drive. Hard disks can be read, 

applications can be used, but system 
fails to boot from a hard disk. 

1. 

Back up data and applications 
files.   

2. 

Reformat the hard drive. 
Re-install applications and data 
using backup disks. 

Screen message shows “Invalid 
Configuration” or “CMOS Failure.” 

Review system’s equipment. Make sure 
correct information is in setup. 

System cannot boot after user installs a 

second hard drive. 

1. 

Set master/slave jumpers 

correctly. 

2. 

Run SETUP program and select 
correct drive types. Call the drive 

manufacturers for compatibility 
with other drives.