Справочник Пользователя для Lorex L15LD400

Display Modes

• Connect the POWER cable located on the back of 

the Observation System. The unit will automatically 
power on.

• The System will load the firmware

• The System will perform a Hard Drive check.

• The unit will initially load to a split screen view, 

displaying all 4 cameras (if available).

NOTE: If a new HARD DRIVE is detected, the system 
will prompt you to FORMAT the drive. If you do not 
choose to format the HARD DRIVE, the drive will not 
be detected by the system.

If you choose to FORMAT a drive in this way, the 
drive will no longer be readable by a regular PC 
without using the HARD DRIVE VIEWER software 
included on the CD provided with this unit.