Справочник Пользователя для Lorex L15LD400

Record Setup 

1. CHANNEL - Select a single channel to setup the 

schedule. 

2. TYPE - Select a recording mode: 

• Continuous Recording: Recording is 
constantly occurring. 

• Motion: Begins the recording when motion is 

detected. 

• Alarm: Begins the recording when an alarm 

is detected 

• Motion and Alarm: Sets the system to 
record when Motion and/or an Alarm is 
detected.

3. 0~24 Hour - Activate or deactivate the schedule 

for a particular hour in a week.

4. SUN~SAT - Activate or deactivate the scheduled 

hours in a day. All hours in the day can be activated 
or deactivated by double clicking on the name of 
the day (i.e. Mon., Tue etc.).

NOTE: If the DVR is set to MOTION RECORDING 
and the DVR keeps recording continuously or is not 
triggered to record as expected, please check the 
sensitivity settings and the motion mask setup in 
CONFIGURATION>MOTION SETUP. 

If the motion settings are too sensitive, you may 
want to lower the sensitivity level and define a 
motion detection area for more accuracy. If the 
motion is not triggered as expected, you may want 
to increase the sensitivity level, clear the motion 
mask, or enlarge the detection area.