Справочник Пользователя для M-S Cash Drawer A794

A794 Owner’s Guide

Chapter 6: Programming Information

December 1999

125

ESC FF

1B 0C

27 12

Collectively prints all buffered data in the printing area.

After printing, the printer does not clear the buffered data and sets values for Select
Print Direction in Page Mode (1B 54 n) and Set Print Area in Page Mode (1B 57 …), and
sets the position for buffering character data.

This command is enabled only in Page Mode.

ESC L

1B 4C

27 76

Switches from Standard Mode to Page Mode. After printing has been completed either
by the Print and Return to Standard Mode (FF) command or Select Standard Mode (1B
53) the printer returns to Standard Mode. The developed data is deleted after being
printed. For more information see Page Mode in this document

This command sets the position where data is buffered to the position specified by
Select Print Direction in Page Mode (1B 54) within the printing area defined by Set Print
Area in Page Mode (1B 57).

This command switches the settings for the following commands (which values can be
set independently in Standard Mode and Page Mode) to those for Page Mode.

♦

 

Set Right-Side Character Spacing (1B 20)

♦

 

Select 1/6-Inch Line Spacing (1B 32)

♦

 

Set Line Spacing (1B 33)

It is possible only to set values for the following commands in Page Mode. These
commands are not executed.

♦

 

Select or Cancel 90 Degree Clockwise Rotation (1B 56)

♦

 

Set Counter Clockwise Rotation (1B 12)

♦

 

Select Justification (1B 61)

♦

 

Select or Cancel Upside-Down Printing (1B 7B)

♦

 

Set Left Margin (1D 4C)

♦

 

Set Print Area Width (1D 57)

The command is enabled only when input at the beginning of a line

The command has no effect if Page Mode has previously been selected.