Справочник Пользователя для Crimestopper Security Products CS-2012DPII-TW1

Скачать
Страница из 20
 
14 
OPTIONAL TURBO TIMER MODE 
 
OPTIONAL TURBO TIMER MODE: 
IMPORTANT NOTE: This mode requires the use of an extra part called a momentary switch or button 
that  is  not  included  with  the  kit.    Check  with  your  installer  about  adding  this  feature.    The  optional 
Turbo Timer mode allows the your system to keep your vehicle running for 1 to 5 minutes [selectively] 
after you remove the  key, exit  the vehicle, and lock the doors remotely  [if  you own  a  Turbo  or Turbo 
Diesel].  This is handy for turbo cool down without the need for expensive Turbo Timers. 
 
1)  Engine should be running with the key.  Press and hold the brake pedal. 
2)  Press your “Turbo Timer” button 1 to 5 times for each minute of run time you desire. (1 press = 1 min.) 
3)  Release the brake pedal and your system will confirm by flashing the lights the same number of times the 
button was pressed. 
4)  Turn Ignition switch OFF, remove key and exit the vehicle.  Remote lock your doors for safety.  The engine 
should remain running for the selected number of minutes. 
 
CAUTION!!  IF YOU PRESS THE TURBO TIMER BUTTON WHEN ENGINE IS NOT RUNNING IT WILL 
TRIGGER A REMOTE START!  MAKE A NOTE OF THIS IF YOU HAVE CHILDREN.  CONSIDER THIS 
WHEN CHOOSING A LOCATION FOR YOUR TURBO TIMER BUTTON. 
REMOVE KEY
PRESS TURBO
FLASH 1-5X
EXIT VEH.
PRESS
AND HOLD
BRAKE
TIMER BUTTON
1-5 TIMES
RUNNING
RELEASE
BRAKE
LIGHTS
RUNNING
REMAIN
1-5 MIN.