Справочник Пользователя для AstroStart Security System VSS-113

ISARMING WITHOUT A TRANSMITTER

This feature allows you to disarm the security system without the remote transmitter should it be

lost or damaged. In order to disarm the system without a remote transmitter, you must have the

vehicle’s ignition key and know where the Valet button is located. Be sure to check with the

installer for the location and the number of presses of the Valet button required to disarm the

system.

STROFLEX

LECTRONICS

– A

LL RIGHTS RESERVED

To disarm the security system, turn the ignition to the ON position.

Press the Valet button the preset number of times (one to five

times) within 15 seconds. After 5 seconds, the system will now

disarm. If the system does not disarm, you may have waited too

long; turn the ignition off and try again.

Location of Valet Button :

Number of Pulses :

Important! The unit can be programmed to respond to one to five pulses of the Valet button

for the disarm function. Be sure to check with the installer for the desired programming.

ILENT MODE

To temporarily turn off the arm or disarm chirps, use Silent Mode™. Simply press

for less than

one second before arming or disarming, and the confirmation chirp(s) will be eliminated for that

one operation only. If you want the arm/disarm chirps turned off permanently, your dealer can

do this for you.

Note: The Warn Away

response to lighter impacts is bypassed if the system is armed

using Silent Mode. This ensures that no chirps will be emitted by the siren in an area

you want chirp-free.

The system is still fully capable of triggering, only the Warn Away

response is bypassed.

ANIC MODE

If you are threatened in or near your vehicle, you can attract attention by triggering the system

with your transmitter. Just press

for five seconds, and you will enter Panic Mode. The

siren will sound and the parking lights will flash for the programmed siren duration. To stop Panic

Mode at any time, press

for one second on the remote transmitter again.

ALET MODE

You can prevent your security system from automatically arming and triggering by using Valet

Mode. This is very useful when washing the vehicle or having it serviced. In Valet Mode, the