Справочник Пользователя для Eltax AVR-900
7
CONNECTION
FM INDOOR ANTENNA
If you live reasonably close to a transmitter and want to
use the provided lead-type FM antenna, you will have to
connect it direct to the “FM 75Ω” socket.
Fit the metal sleeve of the lead-type antenna over the core
(center) pin of the (FM 75Ω) socket, extend the lead and
attach it to a window frame or wall with thumbtacks, or
move around the room, where reception is best.
Lead-type FM Antenna (75Ω provided)
If you live reasonably close to a transmitter and want to
use the provided lead-type FM antenna, you will have to
connect it direct to the “FM 75Ω” socket.
Fit the metal sleeve of the lead-type antenna over the core
(center) pin of the (FM 75Ω) socket, extend the lead and
attach it to a window frame or wall with thumbtacks, or
move around the room, where reception is best.
Lead-type FM Antenna (75Ω provided)
ANTENA
FM
75Ω
AM
LOOP
Optional
ANTENA
FM
75Ω
AM
LOOP
OUTDOOR FM ANTENNA (75Ω)
FM OUTDOOR ANTENNA
In an area where FM signals are weak, it will be
necessary to use a 75Ω unbalanced-type outdoor FM
antenna using the optional matching transformer, as
shown. Generally, a 3-element antenna will be sufficient:
if you live in an area where the FM signals are
particularly weak, it may be necessary to use one with 5
or more elements. Connect the coaxial cable of the
antenna to the matching transformer as shown. After
completing connection, plug the transformer into the “FM
75Ω” socket.
How to connect a coaxial cable to the matching
transformer
Strip the cable and dress it as shown.
In an area where FM signals are weak, it will be
necessary to use a 75Ω unbalanced-type outdoor FM
antenna using the optional matching transformer, as
shown. Generally, a 3-element antenna will be sufficient:
if you live in an area where the FM signals are
particularly weak, it may be necessary to use one with 5
or more elements. Connect the coaxial cable of the
antenna to the matching transformer as shown. After
completing connection, plug the transformer into the “FM
75Ω” socket.
How to connect a coaxial cable to the matching
transformer
Strip the cable and dress it as shown.
4mm 3mm
7mm
Press both side tabs outward to remove the cover.
Wrap the core conductor around the central metal fixture
as shown.
as shown.
Crimp the jagged metal fixtures so they hold the braided
portion using pliers, etc. Put the cover back in place.
Jagged metal
Jagged metal
Insert into slit.
AM INDOOR LOOP ANTENNA
To stand the antenna on a surface, fix the claw to the slot.
To stand the antenna on a surface, fix the claw to the slot.
1
2
3
High performance AM loop antenna provided with the
receiver is sufficient for good reception in most areas.
Connect the loop antenna’s wires to the AM antenna
terminals as shown.
Place the antenna on a shelf, for example, and move
around to obtain the best reception, place as far away as
possible from the entire system, speaker leads and the
power cords, to prevent unwanted noise.
AM Loop Antenna (provided)
ANTENA
FM
75Ω
AM
LOOP
AM Outdoor
Antenna
AM Outdoor Antenna
If the AM loop antenna provided does not receive
sufficient reception, it may be necessary to use an outdoor
AM antenna.
Use an insulated cable of a length of 15 ft (5m) long, strip
one end, and connect this to the terminal as shown.
The antenna wire should be strung outdoors or indoors
near a window.
For better reception, connect the GND terminal to a
reliable ground.
Note: When connecting an outdoor AM antenna, do not
disconnect the AM loop antenna.