Справочник Пользователя для Multiquip Pet Fence mtr-40hs

Figure 1 shows the location of the controls  and components
for the MTR-40HS Tamping Rammer. The functions of each
control is described below:

1.

–  Used to adjust engine speed (rpm).

Move lever forward 

(SLOW) to reduce engine speed,

move lever back toward operator 

(FAST) to increase

speed.

2. Fuel Shut-Off Valve – Supplies fuel from the fuel tank to

the engine. To begin fuel flow move the fuel shut-off valve
downward.

3. Primary Air Cleaner  – Pre-cleans (first stage)  dirt and

other debris from entering the engine.

4.

–  Laminated wood with tempered steel plate for

superior shock absorption.

5. Grip –  When transporting the rammer, carry it by griping

the handle.

6. Nameplate –  Displays information regarding the rammer.

7. Handle – To operate rammer  

GRIP handle assembly

firmly on both sides.

8. Fuel Tank/Cap 

  Remove this cap to add unleaded

gasoline to the fuel tank. Make sure cap is tightened securely.
DO NOT over fill.

Adding fuel to the tank should be accomplished only
when the engine is stopped and has had an
opportunity to

 cool down.  In the event of a fuel spill,

DO NOT attempt to start the engine until the fuel

residue has been completely wiped up, and the area surrounding
the engine is dry.

9. Oil Tank/Cap –  Remove this cap to add 2-stroke

outboard motor oil to the oil tank.  Make sure cap is
tightened securely.  DO NOT over fill.

10. Engine Air Cleaner – Prevents dirt (second stage) and

other debris from entering the engine.

11. Dust Sleeve – Prevents dust and debris from entering

into the spring cylinder.