Справочник Пользователя для Integra PLA-50V1

7

Connect the supplied remote cable to the remote control
unit’s remote jack and the “REMOTE CONTROL”
terminal on the monitor.
When the cable is connected, the mode automatically
switches to wired remote control. When the wired remote
control mode is used, the remote control unit can be
operated even if no batteries are loaded.

* Use the remote control unit within a distance of about 7 m/

23ft. from the front of the monitor’s remote control sensor
and at a horizontal angle of within 30°.

* The remote control operation may not function if the

monitor’s remote control sensor is exposed to direct
sunlight or strong artificial light, or if there is an obstacle
between the sensor and the remote control unit.

• Do not drop or mishandle the remote control unit.
• Do not get the remote control unit wet. If the remote

control unit gets wet, wipe it dry immediately.

• Avoid heat and humidity.
• When not using the remote control unit for a long period,

remove the batteries.

• Do not use new and old batteries together, or use different

types together.

• Do not take apart the batteries, heat them, or throw them

into a fire.

• When using the remote control unit in the wireless

condition, be sure to unplug the remote cable from the
REMOTE CONTROL terminal on the monitor.

RS MUST

ORE THAN
RATING
NCE  6  OHM

LEFT

RGB 3

(Digital RGB)

RGB 1

R/CR/PR

G/Y

B/CB/PB

HD

VD

L(MONO)

R

L(MONO)

Y

CB/PB

CR/PR

R

L(MONO)

AUDIO 3

AUDIO 2

DVD1/HD1

AUDIO 1

RGB2/ DVD2/ HD2

R

REMOTE
CONTROL

EXTERNAL
CONTROL

CONTROL
LOCK

ON    /OFF

VIDEO 1

VIDEO 2

VIDEO 3

Remote Control
Cable

To Remote Jack 

POWER/STANDBY

LUME

UP

INPUT SELECT
/EXIT

LEFT/–

RIGHT/+

30˚

30˚

Approx.
7m/ 23ft