Справочник Пользователя для Sharp 100-EVIK

VisiKey™ Wired Keyboard Manual

2 of 4

Thank you for purchasing the new VisiKey™ Enhanced Visibility Internet
Keyboard.

       Software Installation

        Depending on your Windows™ System, you may not need to install software to use
        your keyboard.  See section titled “System Requirements” to see if you need to
        install software.

System Requirements

 IBM PC compatibles
 USB or PS/2 port for keyboard
 Microsoft Windows™  Me, 2000 and XP

a)  If you are operating Windows™  XP, 2000, or ME, you do not need to install any software.

Proceed to Connect Your Keyboard.

b)  If you are operating Windows™ 95 or Windows™  98, install the software provided before

attempting to connect the keyboard.

1.  Insert software.
2.  Double click installer icon.
3.  Follow instructions.

       Connect Your Keyboard

       

PS/2 Connection (recommended)

1.  Shut down and turn off your computer.
      Make sure the USB-to-PS/2 adaptor (green) is attached to the Universal
      Serial Bus (USB) connector and then plug it into your computers round
      PS/2 keyboard port.
2.  Turn on your computer.
3.  Enjoy using your VisiKey™ Enhanced Visibility Internet Keyboard.

USB Connection (advanced and laptop users only)

If your keyboard has a Universal Serial Bus (USB) connector, you can plug it into your
computer’s USB port.  However, a PS/2 connection is recommended because some computers
do not fully support USB keyboards.

1.  With your computer turned on, plug the rectangular USB connector into your computer’s

rectangular USB port.

2.  Enjoy using your VisiKey™ Enhanced Visibility Internet Keyboard.