Инструкции Пользователя для Weber 900 LP
![Weber](https://files.manualsbrain.com/attachments/c7115a41a12656cf2fb71398fc30dbf196a2c998/common/fit/150/50/bc0507caa8a246f5e61eaf79b29a440a978c00cac1fc5e9187e5f2d5ca29/brand_logo.png)
Crossover Ignition System Operations
If the Crossover Ignition System fails to ignite the Front
burner, light the Front burner with a match. If the Front
burner lights with a match, then check the Crossover
Ignition System.
burner, light the Front burner with a match. If the Front
burner lights with a match, then check the Crossover
Ignition System.
■
Check that both the white and black ignition wires are
attached properly. Figure 20.
attached properly. Figure 20.
Figure 20
White wire
Black wire
■
Check that the Crossover Ignition button pushes the
igniter (button) down, and returns to the up position.
igniter (button) down, and returns to the up position.
■
Check to see if the igniter is loose in the frame.
Tighten if necessary; see Step “Install igniter” for
correct procedure.
Tighten if necessary; see Step “Install igniter” for
correct procedure.
If the Crossover Ignition System still fails to light, contact
Weber-Stephen Customer Service.
Weber-Stephen Customer Service.