Справочник Пользователя для Wasp Bar Code Wasp Duraline WLS 8400 ER
RS-232 Interface
6-7
*In the Nixdorf Mode B or OPOS/JPOS, if CTS is Low, scanning is disabled. When CTS is High, the user can scan
bar codes.
bar codes.
**If Nixdorf Mode B or OPOS/JPOS is scanned without the scanner connected to the proper host, it may appear
unable to scan. If this happens, scan a different RS-232 host type within 5 seconds of cycling power to the scanner.
unable to scan. If this happens, scan a different RS-232 host type within 5 seconds of cycling power to the scanner.
Table 6-2. Terminal Specific RS-232
Parameter
Standard
RS-232
(Default)
ICL
Wincor-
Nixdorf
Mode A
Wincor-
Nixdorf
Mode B
Mode B
Olivetti
Omron
OPOS/
JPOS
Fujitsu