Справочник Пользователя для Insignia HCC334L
Rev 3
7
G-113077-001
02/07
Auto White Balance Control (AWC)
This mode covers a wider range of 2000°K to 10000°K and
performs at a faster operating speed than ATW mode. This
mode is typically used for outdoor applications or where
variable lighting conditions exist.
performs at a faster operating speed than ATW mode. This
mode is typically used for outdoor applications or where
variable lighting conditions exist.
One Push Lock
Press PUSH LOCK on the rear of the camera to calibrate
the white balance for the current scene. This mode is
typically used for scenes with constant lighting conditions.
the white balance for the current scene. This mode is
typically used for scenes with constant lighting conditions.
Synchronization Selection (LL/INT)
This switch selects the synchronization mode of the
camera. When the camera is connected to an AC supply,
the Line lock (LL) mode is used to lock the camera’s frame
rate to the frequency so that each camera in the system is
triggered at the same point on the supply’s AC cycle. The
default setting is LL.
camera. When the camera is connected to an AC supply,
the Line lock (LL) mode is used to lock the camera’s frame
rate to the frequency so that each camera in the system is
triggered at the same point on the supply’s AC cycle. The
default setting is LL.
WARNING!
The LL/INT switch must be set to INT
when operating from 12 VDC.
when operating from 12 VDC.
L/L
INT
V-PH
-
+
PUSH
LOCK
LOCK
IRIS
LEVEL
LEVEL
V-PH
PWR
VIDEO
L/L
INT
VSD
DC
ME
AI
BLC
FL
AGC
WB3
WB2
WB1
AI
BLC
FL
AGC
WB3
WB2
WB1
EE
AES
OFF
GND
DC 12V
AC 24V
AC 24V