Инструкции Пользователя для Bunn ITCB DV HV
4
USER NOTICES
Carefully read and follow all notices in this manual and on the equipment. All labels on the equipment should
be kept in good condition. Replace any unreadable or damaged labels.
For 120/208V or 120/240 volt operation,
replace Power Supply Cord only with
Bunn-O-Matic part number 01699.0000.
replace Power Supply Cord only with
Bunn-O-Matic part number 01699.0000.
!
CAUTION
#34072.0000 ITCB
#03408.0000
#03409.0000
As directed in the International Plumbing Code of the
International Code Council and the Food Code
Manual of the Food and Drug Administration (FDA),
this equipment must be installed with adequate
backflow prevention to comply with federal, state
and local codes. For models installed outside the
U.S.A., you must comply with the applicable Plumb-
ing /Sanitation Code for your area.
#00986.0000 ITCB
WARNING
• DO NOT OVERLOAD CIRCUIT.
• ALWAYS ELECTRICALLY GROUND
THE CHASSIS.
• DO NOT DEFORM PLUG OR CORD.
• FOLLOW NATIONAL AND LOCAL
ELECTRICAL CODES.
• KEEP COMBUSTIBLES AWAY.
FAILURE TO COMPLY RISKS EQUIPMENT
DAMAGE, FIRE OR SHOCK HAZARD.
READ THE ENTIRE
OPERATING MANUAL BEFORE
USING THIS PRODUCT
00986.0000F 10/07 ©1994 Bunn-O-Matic Corporation
37881.0000
PN: 00658.0000G 02/08 © 1985 BUNN-O-MATIC CORPORATION
#00658.0000
#00656.0001
To reduce the risk of electric shock,
do not remove or open cover.
No user-serviceable parts inside.
Authorized service personnel only.
Disconnect power before servicing.
39175.0000A 05/06 ©2006 Bunn-O-Matic Corporation
Incorrect programming could result in accidental dispens-
ing of HOT LIQUID.
Trained personnel are to follow instructions provided for
software programming.
Use of additional graphic layer requires disabling of
appropriate switches.
Read all instructions for additional graphic layer prior to
installing and programming.
! WARNING
#39175.0000
36748.3 112912
#00831.0000 ITB
Make su
re Funnel i
s rotated and align
ed with Make sure Funnel is rotated and alig
ned with
Tea Disp
enser on th
e RIGHT side to avo
id Tea Dispenser on the LEFT side to
avoid
potentia
l burns and
water spills. RIGH
T potential burns and water spills.
LEFT
WARNING
HOT LIQUIDS
#41995.0000 ITB DD
WARNING
!
Fill water tank before turning - on -
thermostat or connecting appliance
to power source.
Use only on a properly protected
circuit capable of the rated load.
Electrically ground the chassis.
Follow national/local electrical codes.
Do not use near combustibles.
FAILURE TO COMPLY RISKS EQUIPMENT
DAMAGE, FIRE, OR SHOCK HAZARD
READ THE ENTIRE OPERATING MANUAL
BEFORE BUYING OR USING THIS PRODUCT
THIS APPLIANCE IS HEATED WHENEVER
CONNECTED TO A POWER SOURCE
00831.0000F 3/98 ©1998 BUNN-O-MATIC CORPORATION
#00824.0002
Risk of Fire. Use a UL listed grounding
type attachment plug, rated 125/250
Vac, 30 A, 1 phase, 4 conductor. Plug
to be selected and installed only by
qualified service personnel.
Vac, 30 A, 1 phase, 4 conductor. Plug
to be selected and installed only by
qualified service personnel.
38125.0000A 04/05 © 2005 Bunn-O-Matic Corporation
#38125.0000 TWIN