Листовка для Bunn BCM2

BCM2

23350.0000

120/240V

30

6700

7200

8.0 gal./hr.

42.6

257 lbs. (116.6 kg)

BCM2

23350.0001

120/208V

30

5700

7200

8.0 gal./hr.

42.6

257 lbs. (116.6 kg)

BCM2*

23350.0002

120/240V

30

6700

7200

8.0 gal./hr.

42.6

257 lbs. (116.6 kg)

BCM2*

23350.0003

120/208V

30

5700

6240

8.0 gal./hr.

42.6

257 lbs. (116.6 kg)

*Auto refill on both sides
Electrical: All are 3-wire, single phase, 60Hz.
Plumbing: Brewers are supplied with a BUNN EasyClear

® 

water filter model 120-CP (product no. 30045.0000). The filter and brewer must be

connected to a cold water system with operating pressure between 20 and 90 psi (138-621 kPa) from a 

1

⁄

2

" (13 mm) or larger water supply line.

Install a regulator in the line when pressure is greater than 90 psi (621 kPa) to reduce it to 50 psi (345 kPa). The water inlet fitting is 

3

⁄

8

" (10

mm) OD male flare.

Drain:

The brewer has a 

1

⁄

2

" (13 mm) hose barb fitting

which must be connected to an unrestricted drain.

Physical: This brewer is for use on a sturdy counter at

least 26" (66 cm) deep, 23" (58 cm) wide, with at
least 50" (127 cm) above the counter to allow
adequate space for filling the hoppers. The brewer
weighs approximately 220 lbs (99 kg) with both
ground coffee hoppers, water tank, and waste
bin full.