Инструкции Пользователя для Biostar TForce 6100
Biostar T-Series
TForce 6100
User’s Manual
17
Header for Memory Voltage Overclocking: JDDR_OV>3V
When processing Memory Voltage Overclocking, please place the
jumper to pin1-2 Closed. The Default setting is Pin 2-3 Closed.
jumper to pin1-2 Closed. The Default setting is Pin 2-3 Closed.
1
3
Pin 1-2 Close:
Memory voltage Overclocking.
Memory voltage Overclocking.
1
3
1
3
Pin 2-3 Close:
Normal status (default).
Normal status (default).
Note:
1.
1.
When “JDDR_OV>3V” jumper cap is placed on Pin 2-3,
memory voltage can be manually adjusted under CMOS setup.
memory voltage can be manually adjusted under CMOS setup.
2.
When “JDDR_OV>3V” jumper cap is placed on Pin 1-2,
memory voltage will be fixed at 3.3V automatically, and can’t
be adjusted under COMS setup.
memory voltage will be fixed at 3.3V automatically, and can’t
be adjusted under COMS setup.
3.
Before setting memory voltage overclocking, please ensure
that your DDR supports up to 3V. (Consulting your DDR
supplier)
that your DDR supports up to 3V. (Consulting your DDR
supplier)