Инструкции Пользователя для Biostar M7VIK BIOS
M7VIK BIOS Setup
24
PCI Master
When set to On, you need a LAN add-on card which supports the power function.
It should also support the wake-up on LAN jump.
The Choices: Off (default), On.
When set to On, you need a LAN add-on card which supports the power function.
It should also support the wake-up on LAN jump.
The Choices: Off (default), On.
PowerOn by PCI Card
When you select Enabled, a PME signal from PCI card returns the system to Full
ON state.
When you select Enabled, a PME signal from PCI card returns the system to Full
ON state.
The Choices: Disabled (default), Enabled.
Modem Ring Resume
The Choices: Disabled (default), Enabled.
Modem Ring Resume
The Choices: Disabled (default), Enabled.
RTC Alarm Resume
When “Enabled”, you can set the date and time at which the RTC (real-time
clock) alarm awakens the system from Suspend mode.
When “Enabled”, you can set the date and time at which the RTC (real-time
clock) alarm awakens the system from Suspend mode.
The Choices: Enabled, Disabled (default).
IRQs Activity Monitoring
Press Enter to access another sub menu used to configure the different wake up
events (i.e. wake on LPT & COMM activity).
events (i.e. wake on LPT & COMM activity).
Primary INTR
On
IRQ3
(COM2)
Enabled
IRQ4
(COM1)
Enabled
IRQ5
(LPT2)
Enabled
IRQ6
(Floppy
Disk) Enabled
IRQ7
(LPT1)
Enabled
IRQ8 (RTC Alarm)
Disabled
IRQ9 (IRQ2 Redir)
Disabled
IRQ10
(Reserved)
Disabled
IRQ11
(Reserved)
Disabled
IRQ12 (PS/2 Mouse)
Enabled
IRQ13
(Coprocessor) Enabled
IRQ14 (Hard Disk)
Enabled
IRQ15
(Reserved)
Disabled