Справочник Пользователя для Grandstream Networks Handy Tone 386

HandyTone-386 User Manual

Grandstream Networks, Inc.

End User
Password

This contains the password to access the Web Configuration Menu. This
field is case sensitive.

IP Address

There are 2 modes under which the HandyTone ATA can operate:

- If DHCP mode is enabled, then all the field values for the Static IP mode
are not used (even though they are still saved in the Flash memory.) The
HandyTone ATA will acquire its IP address from the first DHCP server it
discovers from the LAN it is connected.

To use the PPPoE feature the PPPoE account settings need to be set. The
HandyTone will attempt to establish a PPPoE session if any of the PPPoE
fields is set.

- If Static IP mode is enabled, then the IP address, Subnet Mask, Default
Router IP address, DNS Server 1 (primary), DNS Server 2 (secondary) fields
will need to be configured. These fields are reset to zero by default.

Time Zone

This parameter controls how the displayed date/time will be adjusted
according to the specified time zone.

Daylight Savings Time This parameter controls whether the displayed time will be daylight savings

time or not. If set to Yes, then the displayed time will be 1 hour ahead of
normal time.

In addition to the Basic Settings configuration page, end users also have access to the device Status
page. The following is a snap shot of the device Status page. Details will be explained next.

Grandstream Device Configuration

STATUS BASIC SETTINGS ADVANCED SETTINGS

MAC Address: 00.0B.82.00.00.00

WAN IP Address:

Product Model: HT386

Software Version: Program-- 1.0.2.5 Bootloader-- 1.0.1.0 HTML-- 1.0.0.5 VOC-- 1.0.0.10

System Up Time: 0 day(s) 4 hour(s) 43 minute(s)

Registered: Yes

PPPoE Link Up: disabled

detected NAT type is symmetric NAT