Листовка для Bissell TOTAL FLOORS 52C2

©2012 BISSELL Homecare, Inc

Grand Rapids, Michigan

All rights reserved. 

Printed in Vietnam

Part Number 110-4564

Rev 5/12

Visit our website at:

www.bissell.com

For information about repairs or replacement parts,  

or questions about your warranty, call:

or visit the bissell website: 

Your Total Floors

®

 vacuum comes with a  

preinstalled Foam Filter (E). Before assembling  

and using your vacuum, ensure that the Foam  

Filter or Febreze

®

 Filter (D) is installed. See page  

5 of your user’s guide for more information.

1.  Slide the Upper Handle (B) onto the back  

of the Vacuum Base (A).

2.  Locate the screw packet taped to the Carry 

Handle (C). Guide the Carry Handle into 

place onto the back of the Upper Handle  

and insert two of the screws into the  

existing holes. Tighten screws securely  

with a Phillips screwdriver.

1.  Attach the Tool Storage Clip (F) to the back of 

the handle by snapping the piece into the unit 

as shown. Push piece straight in—with the tool 

grips facing down—until it snaps into place.

2.  Attach the Hose Guide Clip (G) to the  

left side of the back of the Vacuum Base. 

Insert tab at a 45 degree angle and turn 

clockwise so it snaps into place.

3.  Attach the Hose Guide/Tool Caddy to the 

bottom of the vacuum base. Align the  

component with the appropriate grooves 

on the back of the unit. Slide into place 

and insert screw into the existing hole. 

Tighten securely with a Phillips screwdriver.

4.  Place the TurboBrush Tool (I) or Pet 

TurboEraser Tool (J) into its holder from the 

front of the vacuum (above the Suction Power 

Indicator). Secure the Tool by snapping the 

tool into the Tool Storage Clip (F).

5.  Mount the Extension Wand (N) and Pet Hair 

Fabric Tool (L) or Long Reach Dusting Tool (K) 

to the back of the unit as shown on page 4 of 

your user’s guide.

6.  Line up the tabs of the Twist n’ Snap Hose 

(P) with the corresponding notches and turn 

clockwise. Slide the end of the hose into 

the Hose Wand Base and wrap around the 

Hose Guides as shown on page 4 of your 

user’s guide.

Scan the code to  

view a short  

assembly video.

Or locate the  

video in the Video  

and Image Gallery  

on www.Bissell.com/total-floors-pet