Инструкции Пользователя для Biostar TForce4 U 775
Biostar T-Series
TForce U 775
User’s Manual
45
B. CPU
Overheated
If the system shuts down automatically after power on of
system for a few seconds that means the CPU protection
function has been activated.
function has been activated.
When the CPU is overheated, the motherboard will shutdown
automatically to avoid damaging the CPU, and the system will
not power on again.
not power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU
surface.
2. CPU fan is rotating normally.
3. CPU fan speed is fulfilling the CPU speed.
3. CPU fan speed is fulfilling the CPU speed.
After confirmation, please follow the steps below to relieve the
CPU protection function.
1. Remove the power cord from power supply for a few
seconds.
2. Wait for a few seconds.
3. Plug in the power cord and boot up the system.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “JCMOS1: Clear CMOS Header” section)
2. Wait for a few seconds.
3. Power on the system again.
3. Power on the system again.