Справочник Пользователя для Benq Professional VP150X

Operation    17

OSD

FUNCTION

Source

The selected source will be displayed at the bottom right of the
screen for 3 seconds after selecting the source.

 

Freeze

The image will be frozen when the Freeze  is  pressed.  A  mark
appears at the lower right of the screen for 3 seconds during the
freeze function. Furthermore, a “ ” mark appears at the lower
right of the screen for 3 seconds when freeze is released. Freeze
is released when the source button or Freeze button is pressed
again.

Mute

Press Mute and the sound will be muted. There will be an OSD
message as shown left:

Press Mute again or the volume +/- buttons to turn off the mute.

Volume

Press volume + or – to adjust the volume. The OSD message on
the left will appear:  (The message will disappear automatically 3
seconds after the volume is adjusted.)

Magnify

By pressing the magnify + , the center of the picture will be
magnified. Press the button again, and the image will be further
magnified (to a maximum of 4X). Press the magnify - button, and
the size of the magnified image will be reduced by 50 percent. To
return to the normal display mode, press Return.  

Laser

Press this button to generate the laser beam.

Disk Pad

If users connect the PS2 (ADB) mouse cable on the projector with
the PC/Notebook (Macintosh/ Powerbook) mouse port, the disk
pad will be able to function as a PC/Notebook (Macintosh/
Powerbook) mouse. When an image has been magnified, press the
Disk Pad button to move around the display area (the mouse
function is not available when magnify function is on).

Drag

This button is a toggle to turn on/off the drag function of the
remote mouse.

Blank

Press Blank to activate or release the blank function.