Инструкции Пользователя для Brother 3034D

BEFORE EMBROIDERING

Em
br

de
ry

113

Press

→ The carriage moves to its initial position.

The message will disappear after 15 seconds
or press

to move to the next step.

→ Pattern selection screen appears.

■ Removing the Embroidery Unit

Press

, and then press

→ The carriage moves to the storage position.

Turn off the machine.

Press the release button under the end of the
embroidery unit, and then pull the unit away
from the machine.

a Release button

CAUTION

• Keep your hands and foreign objects away from the

embroidery carriage and frame when the machine is
embroidering. Otherwise, injury may result.

Note

If the machine was not initialized correctly, the initial
screen may not appear. This is not a sign of a
malfunction. If this occurs, turn the machine off, then
on again.

Note

A confirmation message to lower the frame-securing
lever after the carriage moves to its initial position is
displayed.

Continue with pattern selection and remember to lower
the frame-securing lever when the embroidery frame is
attached.

CAUTION

• Always remove the embroidery frame before

pressing .

Otherwise,

the frame may strike

the embroidery foot, and possibly cause injury.

• The embroidery unit will not fit in the storage

box/case if this step is not done.

Note

If the carriage does not move to the storage position,
the embroidery unit cannot be put into its storage box/
case.

Note

Be sure to turn off the machine before removing the
embroidery unit, otherwise damage to the machine
may result.

CAUTION

• Do not carry the embroidery unit by holding the

release button compartment.