Инструкции Пользователя для Brother 3034D
CARE AND MAINTENANCE
Append
ix
177
8
i
Insert the bobbin case so that the projection
on the bobbin case aligns with the spring.
on the bobbin case aligns with the spring.
a Projection
b Spring
b Spring
j
Insert the tabs on the needle plate cover into
the needle plate, and then slide the cover
back into place.
the needle plate, and then slide the cover
back into place.
a Needle plate cover
b Tabs
b Tabs
a
b
b
a
Note
• Never use a bobbin case that is scratched;
otherwise, the upper thread may become tangled,
the needle may break, or sewing performance may
suffer.
the needle may break, or sewing performance may
suffer.
• For a new bobbin case (part code: XC3153-
151(green marking on the screw) (for sewing and
embroidering with bobbin thread recommended by
Brother) or XC8167-151 (pink marking on the screw)
(for embroidering with bobbin threads from other
manufacturers)), contact your nearest authorized
dealer (see page 131).
embroidering with bobbin thread recommended by
Brother) or XC8167-151 (pink marking on the screw)
(for embroidering with bobbin threads from other
manufacturers)), contact your nearest authorized
dealer (see page 131).
• Be sure that the bobbin case is correctly installed.
Otherwise, the needle may break.
a
b