Инструкции Пользователя для Brother 3034D

Скачать
Страница из 201
LOWER/UPPER THREADING
32
g
While holding the thread from the spool with 
both hands, pull the thread through the lower 
notch in the thread guide plate, then through 
the upper notch. Hold the end of the thread 
with your left hand, and then guide the thread 
through the groove, following the arrows in 
the illustration.
a Shutter
h
Without passing the thread through the 
needle bar thread guide, thread the needle on 
the right side.
a Needle bar thread guide
i
Press 
 , or press 
 in the 
screen.
j
Select a stitch pattern.
 
k
Press 
 
to select the setting for twin 
needle sewing.
* The stitch width becomes narrower than with single needle 
sewing.
a Single needle/twin needle setting
 appears.
l
Press the “Start/Stop” button after lowering 
the presser foot lever.
Note
The needle threader cannot be used. Manually pass the 
thread through the eye of the needle from the front. If the 
needle threader is used, damage to the machine may 
result.
Note
If 
 appears as 
 after a stitch is selected, 
the twin needle cannot be used with the selected 
stitch.
a
a
 CAUTION
• Be sure to set the twin needle mode when using the 
twin needle. Using the twin needle while the 
machine is in single needle mode could cause the 
needle to break, resulting in damage.
Memo
To change the sewing direction with the twin needle, 
raise the needle from the fabric, raise the presser foot 
lever, and then turn the fabric.
a