Справочник Пользователя для Benq CP120
Using the projector
41
3. Setting menu
Function
(default setting/
value)
(default setting/
value)
Description
OSD Time (10)
Sets the length of time the OSD will remain active after your last button
press. The range is from 5 to 100 seconds.
press. The range is from 5 to 100 seconds.
Quick Cooling
(On)
(On)
Enables or disables the Quick Cooling function. Selecting On enables
the function and projector cooling time will be shortened from a
normal 90-second duration to approximately 30 seconds.
the function and projector cooling time will be shortened from a
normal 90-second duration to approximately 30 seconds.
Password (off)
This is a selectable function. Selecting On limits use of the projector to
only those who know the correct password. When the function is
activated for the first time, you have to set a password for it. For more
information, refer to
only those who know the correct password. When the function is
activated for the first time, you have to set a password for it. For more
information, refer to
.
Once the password is set and this function is selected, the projector is
password-protected. Users who do not know the correct password can
not use the projector.
password-protected. Users who do not know the correct password can
not use the projector.
WARNING: You will be inconvenienced if you activate the password
functionality and subsequently forget the password.
If viewing online, print out this manual and write the password you
functionality and subsequently forget the password.
If viewing online, print out this manual and write the password you
used in this manual, and keep it in a safe place for later recall.
The password can be entered by using either the buttons on the
projector or the remote control.
projector or the remote control.
The password will display on-screen when being input.
Change
Password
Password
You will be asked to enter the current password before changing to a
new one. For more information, refer to
new one. For more information, refer to
.
Reset
Returns all settings to the factory preset values.
The following settings will still remain: Mirror, Language and
Password.
Password.