Справочник Пользователя для Brother XL5010

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

XL5030 XL5020 XL5010

Pattern

Stitch Length

Foot

4, 5, 6

4, 5, 6 2, 3, 4 Zigzag Stitch

Any

Button

Sewing Foot

1. Measure the distance between the holes and select the appropriate

pattern with the pattern selection dial.

Distance between holes

Pattern

1.7 mm (1/16")

4

4

2

3.5 mm (9/64")

5

5

3

5 mm (13/64")

6

6

4

XL5030

XL5020

XL5010

2. Attach the button sewing foot.
3. Place the darning plate on the needle plate.

(When the machine is equipped with a drop feed lever, lower the
feed dogs by setting the drop feed lever to the up position.)

4. Place a button between the foot and the fabric and make sure that

the needle enters the holes without hitting the button. If it hits, see
step 1.

5. At a slow speed, sew approximately 10 stitches.
6. Remove the material from the machine. Cut the upper and lower

threads and tie the two threads at the back of the fabric.