Справочник Пользователя для Brother S-7200A

 

 

S-7200A 

11

(1)  Knee lifter plate 
(2) Bolt 
 

*  Loosen the bolt (3) and move the 

knee lifter plate (1) to a position 
where it is easy to use. 

 
 
 
 
 
 

<Knee lifter adjustment>    

1.  Turn the machine pulley so that the feed dog is below the 

top of the needle plate. 

2.  Lower the presser foot (5) by using the lifting lever (4). 

 
 
 
 
 
 

3.  Loosen the nut (6). 
4.  Turn the screw (8) to adjust so that the amount of play in 

the knee lifter (7) is approximately 2 mm when the knee 
lifter plate (1) is gently pressed. 

5.  Securely tighten the nut (6). 
6.  Loosen the nut (9). 
7.  Turn the screw (10) until the distance between the end of 

the screw (10) and the knee lifter (11) is approximately 8 
mm. 

8.  Turn the adjusting screw (10) to adjust so that the presser 

foot (5) is at the desired position within a distance of 16 
mm of the needle plate when the knee liter plate (1) is 
fully pressed. 

9. After adjustment is completed, securely tighten the nut 

(9). 

 

  

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

2099M

2100M

2101M

2102M

Within 16 mm