Руководство По Работе для Brother Sewing Machines

Winding/Installing the Bobbin 27

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Insert the bobbin with your right hand so that
the thread unwinds to the left side, and then
pull the thread firmly under the tab with your
left hand.

a Tab

• Be sure to insert the bobbin correctly.

CAUTION

Memo

z The order that the bobbin thread should be

passed through the bobbin case is indicated
by marks around the bobbin case. Be sure to
thread the machine as indicated.

Guide the thread through the slot, and then
pull it toward you to cut it with the cutter.

a Slot
b Cutter

The cutter cuts the thread.

• Make sure that the thread is correctly passed

through the flat spring of the bobbin case. If it
is not inserted correctly, reinstall the thread.

a Flat spring

Reattach the bobbin cover.
Insert the tab in the lower-left corner of the
bobbin cover (A), and then lightly press down
on the right side (B).

The lower threading is finished.

Next, thread the upper thread. Continue with
the procedure in “Upper Threading” (page 28).

Memo

z You can begin sewing without pulling up the

bobbin thread. If you wish to pull up the
bobbin thread before starting to sew, pull up
the thread according to the procedure in
“Pulling up the bobbin thread” (page 36).

● Be sure to install the bobbin so that the

thread unwinds in the correct direction,
otherwise the thread may break or the
thread tension will be incorrect.