Справочник Пользователя для Brother PE-DESIGN V7
189
Arranging Embroidery Designs (Layout & Editing)
Embroidering large-size
embroidery design (custom size)
embroidery design (custom size)
■
Attaching stabilizer to the fabric
Stabilizer must always be used when embroidering
to stabilize the fabric. There are many types of
stabilizer; the type that you will use depends on the
type of fabric that you are embroidering on. For
large-size designs that are split into sections, the
stabilizer must be adhered to the fabric, for
example, by using iron-on stabilizer, sticky stabilizer
or spray adhesive.
to stabilize the fabric. There are many types of
stabilizer; the type that you will use depends on the
type of fabric that you are embroidering on. For
large-size designs that are split into sections, the
stabilizer must be adhered to the fabric, for
example, by using iron-on stabilizer, sticky stabilizer
or spray adhesive.
When using spray adhesive, spray the adhesive
onto a hooped piece of stabilizer that is strong
enough for the entire large-size embroidery. In
some cases, you may need to use two pieces of
stabilizer for your embroidery.
onto a hooped piece of stabilizer that is strong
enough for the entire large-size embroidery. In
some cases, you may need to use two pieces of
stabilizer for your embroidery.
■
Marking the embroidering position
Using the template for the size of hoop that you are
using, mark the embroidering position on the fabric.
using, mark the embroidering position on the fabric.
1.
Punch a hole at the end of each arrow on the
template.
template.
2.
Place the template on the fabric, and then
insert the tip of a marking pen into each hole
to mark the fabric.
insert the tip of a marking pen into each hole
to mark the fabric.
3.
Connect the points marked on the fabric to
draw reference lines.
draw reference lines.
For a large embroidery pattern, reposition the
template to draw the embroidering position for each
section of the embroidery pattern.
template to draw the embroidering position for each
section of the embroidery pattern.
1.
Place the template on the fabric, and mark
points A, B, C and D.
points A, B, C and D.
2.
To mark an area to the right of the previously
marked area, align points A and D on the
template with marks B and C on the fabric.
marked area, align points A and D on the
template with marks B and C on the fabric.
a
Note:
• For best results, attach the stabilizer to the
fabric (as described on this page). Without
the correct stabilizer, the design may
become misaligned due to puckering in
the fabric.
the correct stabilizer, the design may
become misaligned due to puckering in
the fabric.
• Be sure to check the recommendations on
the stabilizer package.
b
Memo:
• The templates are included in the package.
• The templates are also in the Template
• The templates are also in the Template
folder and can be printed out with a printer.
• Template PDF files have been described
within actual size completely. Please
confirm the printing property of your Acrobat
program. If some printing properties such
like “Reduce/Enlarge to fit page” would be
“Checked”, the Acrobat will resize the PDF
automatically. So, please “Uncheck” these
properties before your printing out.
confirm the printing property of your Acrobat
program. If some printing properties such
like “Reduce/Enlarge to fit page” would be
“Checked”, the Acrobat will resize the PDF
automatically. So, please “Uncheck” these
properties before your printing out.
A
B
D
C
A
B
D
C
A
B
D
C