Справочник Пользователя для Brother PE-DESIGN V7

314

Tutorial (Advanced)

Click OK.

Step 2

Creating the embroidery
design

For this example, we will use one of the lace
embroidery patterns provided with the application.

Import the embroidery pattern.

Click File on the menu bar, point to Import,
and then click from File on the submenu.

Select the embroidery pattern file
Largelace.pes in the Sample\Design folder.

Click Import to import the embroidery pattern
file.

Step 3

Checking the embroidering
order

Before the embroidery pattern is sewn, check the
embroidering order to see the order that the
design sections are sewn and determine which
parts of the fabric should be hooped.
The design sections are sewn in order from left to
right, top to bottom.

Check the embroidery design.

Click Option on the menu bar, and then click
Design Property.

Memo:

• With the Section Size (for Hoop Size)

setting, the width and height of the sections
are 10mm smaller than the actual hoop size
in order to provide space for fine positioning
adjustments with adjustment sections. The
10mm is for overlapping.

• It is not necessary for the Section size (for

Hoop Size) to match the Design Page size.
Select the hoop size to be used for sewing.

Memo:

The embroidery order cannot be checked
while the pattern is selected; therefore, be
sure to deselect the pattern before trying to
check the embroidery order.