Справочник Пользователя для Brother PC 8500

70

1

1. Attach presser foot “J”. Sew a reverse stitch at the

beginning of the dart and then sew from the wide end to the
other end without stretching the fabric.

1

Basting

*

If automatic reinforcement stitching is preset, a
reinforcement stitch will automatically be sewn at the sewing
start.

2. Do not sew a reverse stitch at end. Cut the thread at the end

leaving 5 cm (1-15/16”), and then tie both ends together.

3. Insert the ends of the thread into the dart with a needle.

4. Iron the dart to one side so that it is flat.

J