Справочник Пользователя для Brother PC 8500
SCALLOP STITCH
N
Stitch for decorating collars of blouses, edges of table cloths, etc.
5
1. Attach presser foot “N”. Sew the remaining edge of the
fabric so that the stitch doesn’t go right to the edge of the
fabric.
fabric.
1
Surface
*
When the automatic thread cutting and automatic
reinforcement stitch are preset, reinforcement stitches will
be sewn automatically at the start of sewing. Press the
“REVERSE STITCH” button to sew a reinforcement stitch
and trim the thread automatically at the finish of sewing.
reinforcement stitch are preset, reinforcement stitches will
be sewn automatically at the start of sewing. Press the
“REVERSE STITCH” button to sew a reinforcement stitch
and trim the thread automatically at the finish of sewing.
2. Trim along the stitches carefully so as not to cut the stitches.
*
There are products in the marketplace that will “seal” the
trimmed areas. This will give a more finished appearance.
trimmed areas. This will give a more finished appearance.
79
(Programmed